The smal dial/knob for Rear Heat/AC is just spinning instead clicking.

How do you remove the dials/knobs so i can inspec the problem further???

You just pull out on the whole Bezel and it snaps off. Once it's off, it becomes self-explanitory.

http://www.courtesyparts.com/betasite/armada-ta60-2004-2008/genuine-nissan-parts/body-electrical/272-a/c-control-unit/-c-1063_1064_1099_1116.html

What is the Bezel? Excuse the ignorance.. Your not talking about the whole dash are you?

What is the Bezel? Excuse the ignorance.. Your not talking about the whole dash are you?
Yep. It contains the Radio Display and everything. It's all just fronted up with nothing attached and is surprisingly easy to take off.

http://www.courtesyparts.com/betasite/armada-ta60-2004-2008/genuine-nissan-parts/body-front-roof-floor/680-dash-panel-cluster-lid/-c-1063_1064_1172_1185.html

Should you pry it off with a screwdriver or use a different tool?

When PHD007 showed me, we just pulled it off with our fingers. If you pry it, use something to protect the plastic. A wooden paint stick might work too.

Well i fixed it. I took the advice from another board member from a similar thread.

I used Crazy Glue on the clear plastic dial. Let it dry for about an hour and WHAM! it was fixed. We will see how long it lasts. A $2 fix compared to a $400 fix.

Mark one of many things off the list of broken things to be done on the Mada.

I think i am going to stick to Toyotas after this one is done. I cant believe all the freaking problem myself and others have with a Nissan. Most of it is stupid stuff too.