: ****2007 Infiniti QX56 for parts****
I have an 2007 Infiniti Qx56 2wd around 32k miles on it. for parts see picture, have all seats, transmision, some parts from the motor, extierior and interior door panels, navigation, camera, lift gate finish panel, three wheels, just let me know what you need i can check if i have it. PLEASE DON'T ASK HOW IT CRASHED, I GOT IT AT AN AUCTION AND DON'T KNOW ANYTHING.
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_4_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_3_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_2_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_1_I.jpg
Peter Benger 10-01-2009, 11:24 PM Holy smokes!! How is the gauge cluster? Intact? If so how much?? Shoot me a PM.
dragon_27 10-05-2009, 12:32 AM hey do you got the interior quarter panels in the back, by the trunk area. my pitties scratched it all up...
Qx_indulgence 10-05-2009, 02:26 AM How much for the IPDM and the Intake Manifold?
julez32 10-05-2009, 12:49 PM Do you have the wooden console shift plate cover?
Rumplecat 10-05-2009, 01:21 PM Do you have the wood inserts that go in the door handles on the inside?
Playboy27 10-05-2009, 01:50 PM WHAT THE FREAK!? That looks bad..
Do you have the wood inserts that go in the door handles on the inside?
Hi, yes i do, $85 shipped in USA. thanks
Qx_indulgence 10-05-2009, 06:35 PM how bout for the intake manifold and IPDM?
how bout for the intake manifold and IPDM?
ill check if i have that and let you know
hey do you got the interior quarter panels in the back, by the trunk area. my pitties scratched it all up...
Hi, do you need both sides, and do you need the upper panels or the lower, let me know. thanks
How much for the IPDM and the Intake Manifold?
Can you tell me where the IPDM is located so i can check i'm not familiar with that. thanks
Do you have the wooden console shift plate cover?
Hi, i do have it, but the cup holders cover doesn't close, don't know why, i'll try to fix it. let me know if you still want it. thanks
julez32 10-06-2009, 12:19 AM Yeah how much you want for it?
Yeah how much you want for it?
$100 + shipping
Yeah how much you want for it?
I got lot of people interested in it, so let me know asap
Qx_indulgence 10-06-2009, 01:31 AM http://www.titantalk.com/forums/attachments/titan-parts-accessories/78005d1240025059-xe-fog-light-question-009mod-foglight-power-ipdm.jpg
http://www.titantalk.com/forums/attachments/titan-parts-accessories/78004d1240025048-xe-fog-light-question-006mod-red-wire-ipdm-oem-foglight-power.jpg
Top left hand corner of the engine bay. How bout the Intake Manifold?
Rumplecat 10-06-2009, 01:32 AM Hi, yes i do, $85 shipped in USA. thanks
Ok thanks. These are the Dark wood? Are they all in good shape?
dragon_27 10-06-2009, 03:04 AM upper and lower for both sides. oh by the way, what is teh colour of it?
julez32 10-06-2009, 12:52 PM Ok that sounds good to me!!! I guess give me a total w/ shipping and we can set up payment arrangements.
http://www.titantalk.com/forums/attachments/titan-parts-accessories/78005d1240025059-xe-fog-light-question-009mod-foglight-power-ipdm.jpg
http://www.titantalk.com/forums/attachments/titan-parts-accessories/78004d1240025048-xe-fog-light-question-006mod-red-wire-ipdm-oem-foglight-power.jpg
Top left hand corner of the engine bay. How bout the Intake Manifold?
I'll check on that, and i don't have the intake manifold.
Ok that sounds good to me!!! I guess give me a total w/ shipping and we can set up payment arrangements.
$130 shipped, pm me to arrange payment. thanks
upper and lower for both sides. oh by the way, what is teh colour of it?
Ill check if all of them are good, the lower ones are black, and the upper ones are tan. thanks
Ok thanks. These are the Dark wood? Are they all in good shape?
Yes they are dark wood, and they are in good shape
Russian ARMADA 10-06-2009, 03:30 PM How much do you want for the Drivers door window regulator?
How much do you want for the Drivers door window regulator?
$50 + shipping, i'll check if it not broken and let you know
http://www.titantalk.com/forums/attachments/titan-parts-accessories/78005d1240025059-xe-fog-light-question-009mod-foglight-power-ipdm.jpg
http://www.titantalk.com/forums/attachments/titan-parts-accessories/78004d1240025048-xe-fog-light-question-006mod-red-wire-ipdm-oem-foglight-power.jpg
Top left hand corner of the engine bay. How bout the Intake Manifold?
Don't have the IPDM either
upper and lower for both sides. oh by the way, what is teh colour of it?
Hi, the i only have the lower ones for both sides, the upper ones are broken, let me know if your interested. thanks
norcal05SE 10-07-2009, 01:11 AM i want to do a qx conversion on my mada, how much for the grille, bumper, headlights and fenders? thanks dude.
guess you'l have to find it first. thats about the gnarliest wreck i've seen!
drifter518 10-07-2009, 08:12 AM How is the interior of the vehicle? Do you know what color it is?? I'm looking for a middle row center seat in leather that is grey. Also do you know how the tail pipe is??
How is the interior of the vehicle? Do you know what color it is?? I'm looking for a middle row center seat in leather that is grey. Also do you know how the tail pipe is??
Hi, this qx56 had no middle row center seat, it had a console, and the tail pipe is bent a little. thanks
lowincarmada 10-07-2009, 06:43 PM hows the factory navigation system on it still works? if so how much for the unit?
hows the factory navigation system on it still works? if so how much for the unit?
i have a factory navigation from an 2005 qx56, includes screen, navigation player, gps antenna, and pigtails for navigation player, asking $499 for it. thanks
How is the interior of the vehicle? Do you know what color it is?? I'm looking for a middle row center seat in leather that is grey. Also do you know how the tail pipe is??
i doubled checked and the exhaust tail pipe is good, let me know if you're interested
dragon_27 10-08-2009, 04:41 AM how much you want
drifter518 10-08-2009, 07:14 AM How much do you want for the tail pipe and where are you located do you know the shipping cost??
Scorpion 10-08-2009, 08:16 AM i need the back up camera
BlakSpyda 10-08-2009, 10:47 AM Welcome to the club dragon_27!
i need the back up camera
$125 shipped for just the camera. thanks
How much do you want for the tail pipe and where are you located do you know the shipping cost??
From what part do you need it, i'm in sacramento, ca, i need to know how long you need so i can check shipping, and give you a price. thanks
drifter518 10-08-2009, 01:18 PM I really just need from the muffler back, but if it's easier for you to include the muffler and it doesn't change the price much I can put that part on as well. Thanks
I really just need from the muffler back, but if it's easier for you to include the muffler and it doesn't change the price much I can put that part on as well. Thanks
The shipping will cost more, let me know how many inches from the tailpipe, the smaller the less shipping your gonna pay, let me know so i can give you a price. thanks
drifter518 10-08-2009, 02:37 PM well I would need all the way to the flange on the muffler, so basically I have to have the flange on the tail pipe to mount to my muffler. my flanges is what rusted out and the tail pipe seperated from the muffler.
Rumplecat 10-08-2009, 09:20 PM How much for behind cats to muffler? How much for it and shipping to 72764?
How much for behind cats to muffler? How much for it and shipping to 72764?
$300 shipped, for the whole muffler before the cats (no cats included)
how much you want
i just doubled check and one of them is broken so i have only one lower one, $125 shipped for it
drifter518 10-10-2009, 06:55 AM so 300 from cat back shipped??
Scorpion 10-10-2009, 11:00 AM $125 shipped for just the camera. thanks
ill give you $80 for it
ill give you $80 for it
$100 shipped to you is my las price
so 300 from cat back shipped??
Yes $300 shipped. Let me know
The Jonah 10-10-2009, 12:22 PM how is the steering wheel...if it is intact. got pics?
Scorpion 10-10-2009, 12:53 PM can you send me a pic of the part you gonqa send me
how is the steering wheel...if it is intact. got pics?
Hi, yes the steering wheels is intact, the airbag is blown though, sent the pics to jpedroso17@yahoo.com. let me know. thanks
can you send me a pic of the part you gonqa send me
yes, i sent the pics to your email
AdAmRa 07 10-13-2009, 01:54 AM hit me up for the nav, cam
hit me up for the nav, cam
pm d you, the camera sold already
Hash-Slinging Slasher 10-14-2009, 01:48 AM Do you have the driver's side front window motor?
mangarete 10-14-2009, 09:19 AM This is getting really confusing. Do you have the vehicle's trunk lock mounting. If is an automatic door. I need the rear lock motor Please Pm me. Really interested in that part. That part makes the door possible to close and latch. PM please. Really interested.
mangarete 10-14-2009, 09:20 AM Please post what has been sold to the public.
Do you have the driver's side front window motor?
yes $100 shipped
This is getting really confusing. Do you have the vehicle's trunk lock mounting. If is an automatic door. I need the rear lock motor Please Pm me. Really interested in that part. That part makes the door possible to close and latch. PM please. Really interested.
do you need the lock mounting on the tailgate or on the body. thanks
Please post what has been sold to the public.
ok, heres the stuff that are sold, camera with finish panel, cd changer, instrument cluster gauges.
Hash-Slinging Slasher 10-15-2009, 05:48 PM yes $100 shipped
SOLD!! How do you want to handle the payment? Paypal? Just let me know...
SOLD!! How do you want to handle the payment? Paypal? Just let me know...
yes paypal will be good, i pm d you with my paypal email address so you can pay for it. thanks
g pilot 10-20-2009, 02:38 PM I emailed you about the 3rd row seat, I need one that folds 60/40.
Thanks
BlakSpyda 10-20-2009, 10:42 PM Welcome to CA g pilot!
socoso 10-21-2009, 11:00 AM is the front console cover available? what is the color and condition of the leater top?
BlakSpyda 10-21-2009, 11:26 AM Welcome to the club socoso!
is the front console cover available? what is the color and condition of the leater top?
yes, its black, and in good condition
socoso 10-21-2009, 11:38 AM DOH! looking for tan, but thanks!
thebassn8tr 10-23-2009, 06:52 PM How much shipped for MAF Sensor if it's un touched?
How much shipped for MAF Sensor if it's un touched?
where is it located so i can check. thanks
Nickoli415 10-25-2009, 01:04 PM Do you have the 3-way catalytic converter right after the exhaust manifold on the passenger side??? If still intact, how much to would it be to PSC 9, APO,AE 09123 First Class USPS...
thebassn8tr 10-25-2009, 06:11 PM where is it located so i can check. thanks
It is the rectangular thing that inserts in to the intake tube (the tube that the air filter connects to).
It is the rectangular thing that inserts in to the intake tube (the tube that the air filter connects to).
sorry dont have it
midtenarmada 10-30-2009, 08:11 AM Are the front door handles available? If so, what condition are they in.
arceng 10-30-2009, 01:10 PM How much for the front console lid shipped to PA, 15133? Can you post or email me a pic of it to schlegers@yahoo.com? Thanks.
Do you have the interior door wood trim pieces that snap on the door handles?
PM sent.
SZL, did you get my email with my address? I keep getting yours repeatedly asking for my address?
Need to know if you got it.
Thanks,
SZL, did you get my email with my address? I keep getting yours repeatedly asking for my address?
Need to know if you got it.
Thanks,
yes i did, and i shipped it already via Fedex Ground. thanks
toohigh13oi 11-15-2009, 05:28 PM how about the 5 disk cd player how much you want for it
how about the 5 disk cd player how much you want for it
its sold alredy
Tackleberry 12-01-2009, 03:20 PM Another victim of Mrs Woods???????
I have an 2007 Infiniti Qx56 2wd around 32k miles on it. for parts see picture, have all seats, transmision, some parts from the motor, extierior and interior door panels, navigation, camera, lift gate finish panel, three wheels, just let me know what you need i can check if i have it. PLEASE DON'T ASK HOW IT CRASHED, I GOT IT AT AN AUCTION AND DON'T KNOW ANYTHING.
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_4_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_3_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_2_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_1_I.jpg
BlakSpyda 12-01-2009, 10:38 PM Another victim of Mrs Woods???????
OK I like Tiger, but that is some funny shiggity!:D Welcome to CA Tackleberry!
brigman1981 12-22-2009, 04:57 PM How mucu for the entire Navigatin unit, player, screen, and wires?
blocks 12-27-2009, 05:30 AM do you still have the nav. If so do you have a pic and how much would you sell it for
How mucu for the entire Navigatin unit, player, screen, and wires?
Dont have the whole navigation unit, but i have wires for the screen.
dgoodwin430 01-13-2010, 10:54 PM How intact is the front dash?
SimplyModified 02-05-2010, 12:57 AM whats left
whats left
what do you need?
sideshow 02-08-2010, 01:55 PM I'm looking for a wiper cowl. I cant see the pics at work and dont feel like going 9 pages of posts to figure out if you still have it.
[QUOTE=sideshow;149558]I'm looking for a wiper cowl. I cant see the pics at work and dont feel like going 9 pages of posts to figure out if you still have it.[/QUOTsorry dont have it. thanks
hitmantony 02-17-2010, 07:35 PM Sent you a PM about some parts if you have them.
JoeyS 02-18-2010, 02:47 PM Do you have pics of the passenger side vents?
Also the rear wiper arm, if you still have it.
I would like to buy if they fit an 04.
Do you have pics of the passenger side vents?
Also the rear wiper arm, if you still have it.
I would like to buy if they fit an 04.
hi, im not sure if i have the side vents, but i have the rear wiper arm ith motor, let me know and make me an offer, thanks
hitmantony 02-19-2010, 08:53 PM Still looking to buy the harness's and handle, let me know.
Still looking to buy the harness's and handle, let me know.
what kind of harness do you need, and what kind of handles? let me know.thanks
spoonman 02-20-2010, 01:04 AM Do you have the 3 piece trim that goes around the center console? Its about an inch or so wide and runs under the lid of the center console and wraps around the back.
Qx_indulgence 02-20-2010, 12:12 PM is the braking system intact on that truck?
hitmantony 02-20-2010, 06:00 PM what kind of harness do you need, and what kind of handles? let me know.thanks
It was in the PM I sent you but here is what I needed:
Camera and Camera Control Unit pigtails/harness, front dash clock pigtail/harness, rear liftgate and glass hatch handle/button, rear glass hatch lock actuator including all wiring for that.
Thanks.
The Jonah 02-21-2010, 11:20 AM Do you have the center console finisher with brackets which holds the dvd system? Nissan part#'s
The DVD Center Console Insert - Part # 96930-7S100
The DVD Right Bracket - Part # 28093-7S000
The DVD Left Bracket - Part # 28094-7S000
68_Bullitt 02-25-2010, 02:16 PM I need the tool kit used to lower the spare and remove the wheels. It's probably in a bag in the cargo area.
BlakSpyda 02-25-2010, 09:41 PM Welcome to CA 68_Bullitt!
Have you already checked in the storage compartment in the cargo area storage under the floor mat? It should be in the bag like the one pictured on the bumper.
http://www.clubarmada.com/forums/vbpgimage.php?do=full&p=1831&d=1236136306
68_Bullitt 02-26-2010, 12:43 AM Yes, the manual pointed me in that direction and it's not there. It turns out that it's only $30 at the dealer, so it wouldn't be worth having him ship it to me.
Thanks,
Doug
I need the tool kit used to lower the spare and remove the wheels. It's probably in a bag in the cargo area.
sorry, i dont have it.
Armadeous 03-02-2010, 05:35 PM do u still have all the seats.....front, 2 captain chairs middle, and back third row? i need to know how much for all of them...i'll help u take it out. plus i'll drive up there so u don't have worry about shipping.
nyc2005armada 03-02-2010, 05:52 PM Do you still have the instrument cluster? If you do, how much?
do u still have all the seats.....front, 2 captain chairs middle, and back third row? i need to know how much for all of them...i'll help u take it out. plus i'll drive up there so u don't have worry about shipping.
no its sold
Do you still have the instrument cluster? If you do, how much?
sorry it sold
snpr462 03-06-2010, 11:38 PM I'll take the hood!! lol
LIVE4RDO 03-08-2010, 07:02 PM does it have bucket seats in the 2nd row? pictures? price shipped to 11224?
BlakSpyda 03-08-2010, 10:36 PM Welcome to CA LIVE4RDO (Legacy Member)!
danielbell 03-17-2010, 10:57 PM Interested in Nav System, rear camera
BlakSpyda 03-18-2010, 01:51 PM Welcome danielbell!
JBDeVega 03-19-2010, 03:34 AM DO you still have the rear diff and half-shafts? if so how much shipped? also what state, if its close to colorado i may be willing to drive.
BlakSpyda 03-19-2010, 12:13 PM Welcome JBDeVega!
LIVE4RDO 03-22-2010, 12:21 PM Do you still have the lower crank pulley? Please let me know. LIVE4RDO@aol.com. Thank you.
DO you still have the rear diff and half-shafts? if so how much shipped? also what state, if its close to colorado i may be willing to drive.
Hi, yes i do, make me an offer, and im in sacramento, california.
Do you still have the lower crank pulley? Please let me know. LIVE4RDO@aol.com. Thank you.
hi, can you tell me where its located or send a pic how it look like so i can check. thanks
ewill138 04-07-2010, 09:55 AM Do you still hsve the navigation and camera?
RacingBull 10-13-2010, 10:37 PM do you have front seats still? Condition? Color?
RacingBull 10-20-2010, 02:38 PM Hey,
do you have the front seats? if so what kind of shape/color/ etc?
Thanks
armadablanca 10-20-2010, 05:27 PM do you have the wood stering wheel pls advise thanks
Christopher020490 10-31-2010, 01:01 PM Another victim of Mrs Woods???????
Hey im new to the scene how much would you sell me the third brake light if it still works
Christopher020490 11-01-2010, 03:35 AM I have an 2007 Infiniti Qx56 2wd around 32k miles on it. for parts see picture, have all seats, transmision, some parts from the motor, extierior and interior door panels, navigation, camera, lift gate finish panel, three wheels, just let me know what you need i can check if i have it. PLEASE DON'T ASK HOW IT CRASHED, I GOT IT AT AN AUCTION AND DON'T KNOW ANYTHING.
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_4_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_3_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_2_I.jpg
http://i232.photobucket.com/albums/ee245/alexzakusilo/5547336_1_I.jpg
Hey hows it going is the tow hitch still in good condition and how much will it be including shipping we can do this through paypal email christopher020490@yahoo.com
I'm looking for the rear air control knob on the dash. Just that one little piece. lol Do you still have this available?
Chadr17 01-12-2011, 04:16 AM Do you still have the second row seating? If so: Is it 40/20/40 bench or Captain Seats w/console? What color & material is it? How about any rips, cuts, markings etc.? Thanks.
oshweeken 01-12-2011, 03:58 PM Looking for the 4 X4 Selector Switch if you still have it let me know
Thanks
I'm guessing he's finished with this project since it's been the better part of a year since he's posted on this thread.
The interesting story here would be how the driver and passengers faired in this wreck! Did the QX56 protect them? Looks like it was a bad one.
rayrjr 01-17-2011, 10:18 AM I am looking for the transfer case control module that is located behind the glovebox and the nav player under pass seat.
milktruck05-2007 02-26-2011, 10:19 PM I have a 2005 Armada. If you have it, I would like to purchase the main driver power window control switch, and both the blower motors, front and rear. You can email me at mdri123@mail.com. Thank you for your time.
mr.ricoe 06-16-2011, 08:05 PM Hi how much for your navigation system? You can call me at 323-216-2845 or email me at mikericoe@gmail.com thank you
dragon_27 06-22-2011, 12:08 PM interested in calipers, are they still available?
| |