HELP! Engine light on & Mada vibrates & makes rumbling sound after starting it? [Archive] - Nissan Armada Forum: Armada & Infiniti QX56 Forums

: HELP! Engine light on & Mada vibrates & makes rumbling sound after starting it?


Playboy27
10-19-2009, 03:17 PM
Ok guys, My 'service engine light' came on again so I went to the local autozone for they can tell me what the problem is & here is what the print out says...

TOUBLESHOOTING P1446
OEM Brand 2005 NISSAN/DATSUN

Definition

BBEVAP canister vent control valve (closed)

Probable cause:

BB1 - Failed canister vent solenoid
BB2 - Failed EVAP pressure sensor


2nd question, As soon as the light turned on I began hearing and feeling this semi strong rumbling & vibrating right below the dash console, Would this be related with the issue above?:confused:

Playboy27
10-19-2009, 05:15 PM
Bump Bump Bump

Playboy27
10-19-2009, 07:27 PM
Bump Bump Bump

Playboy27
10-19-2009, 07:33 PM
Bump Bump Bump

henry NY
10-19-2009, 08:00 PM
you should change the vent control valve is located behind rear drive side tire.remove tire and its a 15 minutes fix

Playboy27
10-20-2009, 12:54 AM
you should change the vent control valve is located behind rear drive side tire.remove tire and its a 15 minutes fix

Where can I buy a vent control valve?

marctronixx
10-20-2009, 07:47 AM
nissan... courtesy nissan parts or somesuch is a place tha sells the parts cheaper...

Playboy27
10-20-2009, 01:04 PM
What should I get? The canister vent control valve? Or the canister vent solenoid or EVAP pressure sensor??

marctronixx
10-20-2009, 08:11 PM
try this link and see if i helps...
http://www.clubarmada.com/forums/showthread.php?t=15293&highlight=cannister

marctronixx
10-20-2009, 08:13 PM
try this search link. if it doesnt work use "canister"...

http://www.clubarmada.com/forums/search.php?searchid=779061

BlakSpyda
10-20-2009, 10:49 PM
Welcome to CA henry NY!

Playboy27
10-21-2009, 02:40 PM
try this link and see if i helps...
http://www.clubarmada.com/forums/showthread.php?t=15293&highlight=cannister

Thanks for the thread link, It helps:)