1st stage of system complete.
2 JL Audio 10w14
Kole Audio 700 Watt
4 awg power and ground wire.
The first 5 pics are.
1 Firewall hole on passenger side
2 Rubber grommet on 4 awg wire
3 Underneath truck u can see stick and battery wire. Plus I had to use coat hanger to pull wire down from behind firewall.
4 7 ft stick to pull wire through engine compartment
5 Electrical tape wrapped around stick and wire

2nd stage of system
6 Trace and cut cargo trunk board
7 Cargo board and two individual boxes sunk into trunk space
8 Carpet board and boxes
9 :mad::confused::D Went through 3 stages in trying to find a 12V ignition source. The pic is left side of cig lighter but it was constanct so I went to passenger side cig lighter works perfectly even while in use.
10 Final pic of system. I would have never thought 2 10 's would sound good in this big and spacious vehicle.

Looks Great!! What head unit are you using?

2008 with factory unit and premium bose sound.

pretty much the same as I did, at first. Then upgraded all of the speakers. Finally got the funds together for a Kenwood DNX and what a difference, that 5 volt pre out and built in EQ made it that much better!

Great job


Sent from my Autoguide iPhone app

Nice work, looks :temphot:

wow good work done. is it enough bass for you with 2 tens?

It'll do. I would have preferred my 12 inch Alpine Type R but it requires a big box. Each of 10 has a around 0.688 cuft. It stands a total of 10 inches in height when I preferred 7" but miss calculated oh well. You can hear me coming down the block.

THat is nice...

You have to post a vid of the system


Sent from my Autoguide iPhone app