Whats up guys... i'm buying some used fog lamps off of a wrecked armada and I'm wondering what all needs to be included for a seamless install? I noticed the foglamp switch is on the headlamp switch so I suppose i'll need that as well. How complicated is it going to be to install this switch and does my SE have all the prewiring needed to make this happen?

Also, Im thinking about buying some 05 LE mirrors with the lights on them. Will they plug right in and actually function?

Thanks in advance....

Whats up guys... i'm buying some used fog lamps off of a wrecked armada and I'm wondering what all needs to be included for a seamless install? I noticed the foglamp switch is on the headlamp switch so I suppose i'll need that as well. How complicated is it going to be to install this switch and does my SE have all the prewiring needed to make this happen?

Also, Im thinking about buying some 05 LE mirrors with the lights on them. Will they plug right in and actually function?

Thanks in advance....
Welcome back to the site.

For the fog lights...

http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=999F1-A6000
This site has the install instructions.

For the mirrors with the turnsignals...

http://www.burtmanindustries.com/zoomprod.php?id=arm_signal_mirrors

This site has the instructions. The site seems to be down right now. So check on them later. 928-252-6199 - they are open and people can still call in any orders.
The mirrors aren't just plug and play though. You have to do a little more than just plug 'em in!

Make sure you have fog lamp grommets. They are white and snap into the bumper so you can snap your light into them. If you pull the light off anarmada, it is very likely that the grommets were left on the bumper. You can buy those grommets from your dealer for aprx $1.50 each.

This install looks very easy, im really tempted right now...

20 minutes start to finish... thats both lamps and the switch

20 minutes start to finish... thats both lamps and the switch
It took me longer to read and make sure I understood the instructions then actually putting them in. Just being careful will extend your time a little... unless you do this kind of thing for a living.

i want to replace my stock white fogs with a yellow...i can only find bulbs with the "L" shaped neck that wont fit....any suggestions?