3" drop spindles cutom built. These are not for a static drop, these are to be used if you plan on doing airride or hydraulics. Feature upper and lower uniballs and heim joint tie rods. These were built to be able to run the largest diameter wheel with maximum travel in mind....$1250 ( over $500 in uniballs and heim joints alone).

What makes the diffence in the motion spindles and one designed for static use?

nicely done fftitan

The uniballs

so this work in our Armadas right, have you tested them, and if so do you have pics

Thanks

Yes these will work for the armada, you will need new upper and lower control arms built but since your in Florida I can have these made for you. They have not been tested but there is really no need, these WILL work. A lot of work went into the design of these with steering geometry, ackerman, alignment, and bumpsteer all in mind.

and how stong are they, i dont want to be rolling down the road and i see my wheels fly off LOL :D

Stronger than stock, these things are beefy

I can even add 4 slam specialties air bags, 2 viair 450 compressors, 2 7-gallon airtanks, 4 1/2 valves, and a white face dual needle gauge, all BRAND NEW for an additional $750. Thats spindles and airride for 2k total. All you will need is airline, the new upper and lower control arms and the install.

airride is sold but spindles are still available