Kits are now ready and can be ordered via the website. Same Burtman Industries quality as seen in our FX kits. With the sale, you are saving $50 on the kit.

www.burtmanindustries.com (http://www.burtmanindustries.com) - then look for SEARCH by VEHICLE. Layout is now up and on sale.

http://www.burtmanindustries.com/images/prodimages/qx_light_front_full.jpg

http://www.burtmanindustries.com/images/prodimages/qx_drk_front_full.jpg

Qx kits are made to match either the light or dark factory wood.

I like the dark factory wood. I think it suit up with the gray interior. I'm actually in the process of installing one in my armada. Also, my neighbor have the same armada and he installed a LED neon lights on the bottom and it looks great. :goteam:

Cool, we also can do this color for the Armada.

Just want to find out what you are saying JB. You have kits now for QX56 to add additional wood to the stock stuff, or kits that allow you to change the wood, or kits for the Armada that look like the QX woods, or all the above? I like the limited amount of wood in the qx minus the steering wheel. Problem I've found is most kits have a lot more too them and cost a lot more. I was debating on getting the Infiniti stuff like the center console, gauge, and door stuff. Do you have a kit for the Armada that will make the interior look like the QX and not go crazy on the price?
Thanks

I too would be interested in the smaller amount of wood trim kit like 92TB. Too much is a bad thing.

Just want to find out what you are saying JB. You have kits now for QX56 to add additional wood to the stock stuff, or kits that allow you to change the wood, or kits for the Armada that look like the QX woods, or all the above? I like the limited amount of wood in the qx minus the steering wheel. Problem I've found is most kits have a lot more too them and cost a lot more. I was debating on getting the Infiniti stuff like the center console, gauge, and door stuff. Do you have a kit for the Armada that will make the interior look like the QX and not go crazy on the price?
Thanks

Pretty much all of the above to a point.

The Armada kits we have are just the "right" amount of pieces and do not looks overdone. It will look very similiar to the QX kit. Now, if you buy the stock QX pieces, those are going to cost you MUCH, much more, that the full kit we have. The Armada kits are on sale right now for $299 in real wood. I can do synthetic wood too, which is less, but the sale price on the real wood is the deal and the quality is what will blow you away. We do sell this same kit to other dealer that sell it for $699! You can go wrong for the quality and the current price.

I can also have it made in the QX colors, light or dark, whichever you prefer.

Super sale i snow back on for all QX kits. 2004, 2005, and newly released 2006 kits.

How Many Pieces? :)

Everything is on the website with more picture and all the layouts.

The match is right on, which most can't get this close.

Everything is on the website with more picture and all the layouts.

The match is right on, which most can't get this close.

I looked on your site and couldnt find 06 Armada wood kits at all? Interested in real wood or to put brushed aluminum where it isnt today - interior door handle and power window inserts

Can you help?
:confused:

I looked on your site and couldnt find 06 Armada wood kits at all? Interested in real wood or to put brushed aluminum where it isnt today - interior door handle and power window inserts

Can you help?
:confused:

Ok, the 2006 armada kit is now avail!

There were some changes to the radio and the new 06 kit is ready and can be ordered on the site

www.burtmanindustries.com

are this kits with the printed labels or have holes to show the stock labels ?? like were the passenger airbag goes, does the wood kit have printed on it ''passenger airbag'' ??or it has a hole to let the stock print show ??

Luigi

Resurrecting this thread (in part to have above questions answered)

Jason, in general, I like the wood kit, and am interested for my new '06 QX56, in the dark wood. My favorite piece is the one for the rear overhead control panel--NICE! A couple questions I have based on the pictures:

- I assume all these pieces are stick-on? If you look closely or run your finger along the edge, can you tell that they're stick-on, or at least not the same thing as the stock wood pieces?

- I think I wouldn't want quite as many wood pieces as depicted in the pictures. I'm also guessing that the kit is sold with all pieces as-is, instead of being able to choose pieces? I suppose I could just not stick some of the pieces on. :)

- I found it visually appeared just a *tiny* bit different with two pieces--that the large radio/air piece ends at the bottom and leaves the bottom half of the clock and power vents exposed, and to a lesser degree, the outside vent wood pieces end at the top, with the mini-bins on top the dash exposed.

Not huge things, just things I'm curious about before considering it further. Thanks!

They do adhere ovetop the current dash pieces and do look very nice.

Only you will probably know what was added and where. IT's a very good match and completes the truck. THe kit comes as a whole only, and I bet you will end up using more pieces than you think.:)

The vent piece do stop at the top like you said, and this is to revent cracking, as if they were higher, the sun, light, etc, would crack overtime if they went any higher...

http://www.burtmanindustries.com/images/prodimages/qx_drk_front_full.jpg

http://www.burtmanindustries.com/gallery/images/qx_drk_steering.jpg

If you have any other questions feel free to call or email.

All makes sense! It just looks a bit odd to me that the main radio/environmental panel stops halfway down the clock instead of continuing down. I'm guessing that might be because it would be hard to get in the corner at the very bottom of the panel below the power outlets?

Trust me, in person it looks 10 times better ;).