Rear suspension QX56, 2008

[Pops]

Just unplug the wire harnesses to the Compressor and Height Sensor. You'll see them toward the driver side when you're under there.

[Andrey]

Thank you!

And could I use this in front in stock lift:

http://www.shockwarehouse.com/site/p...,-Armada,-QX56

Or this would be better?:

http://cart.bilsteinus.com/product/24-197656/65962/4WD

This is foto of main:



And if I right, this is the Installation Instructions:

http://cart.bilsteinus.com/pdfs/E4-WM5-Y314A00.pdf

It seems to me, that there is different spring seat? Or it's OK?

[Pops]

You can use either but the first one is adjustable if you want a 2" lift later, you just move the spring perch up 1.25" and the front is done then you add the PRG rear pucks to the Rear.

[Andrey]

And what about different spring seat?

[Pops]

Leave whatever comes on the shocks you order. Coilovers are different than struts or shocks so you really don't want to mess with their design.