Nissan Armada & Infiniti QX56 Forums banner

I simple transit blu Bluetooth adapter installation

3K views 3 replies 2 participants last post by  gcuevas20 
#1 ·
Tried to instal the Isimple ISFM23 Bluetooth adapter in my 2011 yesterday. Powered it from the passenger power outlet and tried to splice it in to the aux wires behind the actual aux jack. I took an rca to 3.5 cable and cut the 3.5 end off. I took the copper (ground) from the two rca sides and spliced into the black wire to the aux jack. Then did the same to the red and white wires on the cable and the truck. Turned it on and the phone recognized the device quickly but it sounded bad, like I was in a tunnel. Decided to test it with another rca/3.5 cable directly to the aux jack. It sounded much better. There may have been a little loss in volume but sounded acceptable. Then all of the sudden it's stopped pairing now I can't get it to work again!!!

Anyone ever use one of these?

Thanks Chadi
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top