Cabin Pressure Noise Issue Resolving
1 - 2 of 2 Posts
Joined
·
5,215 Posts
Glad they are correcting the problem. I have printed out all the Service Bulletins so I will have a copy if I need to go to the dealer with a problem.Noellus said:No problems at all from my dealership. I went to check on it today and they had the headliner out.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Loose wire behind rear bumper (QX56) -SOLVED
ProblemsHi, I am hoping someone can give me an idea what this loose cable may be behind my rear bumper. I saw it today when i was working on my rear suspension. The only thing I could think of might be a rear parking sensor, but none of the other sensors are attached in this manner (also the rear...- 14
- 2K
-
sswiss · updated
-
Intelligent Key - Rear Bumper Antenna Location?
ProblemsCan anyone help with the location of the REAR BUMPER ANTENNA for the Intelligent Key on my 2008 Armada? There is a wire hanging down under my bumper and it MUST go to that antenna. The local dealer wasn't much help either. Somewhere in the service manual I saw a diagram, but it wasn't...- 1
- 974
-
End Warranty, Start problems
ProblemsWe have owned our 2017 Armada Platinum for almost two years now and have loved it. That being said, now that we have 35,000 miles on it, we are starting to have problems. I’m taking it back to the dealer I bought it from next Monday to diagnose a BCI malfunction that another dealer failed to fix...- 5
- 5K
-
Center Display / Data reset - 2012 Armada SL 4x2
ProblemsA couple of months ago I started having issues with the data in my center display. Vehicle starts, all data is accurate while running. But, when I shut the vehicle off, then turn it back on, the data resets... mpg, clock, etc. Is like its stuck in a single point in time and reverts back to...- 5
- 163
-
CousinsAJ2 · updated
-
VDC Off, Slip and TPMS light all ON
ProblemsHi. I have Armada 2008. I recently bought it and it was showing VDC SLIP and TPMS lights on dashboard. I hooked the scanner and got P0550 for PSP pressure switch. Once i looked at the PSP switch connector, it was broken and the plug was hanging. I purchased new, installed it and again...- 0
- 50
-
Zak82 · updated
Join now to ask and comment!