Nissan Armada & Infiniti QX56 Forums banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
25 Posts
Discussion Starter · #1 ·
i HAD A PIONEER AVIC N2 NAVIGATION, DVD PUT INTO MY 04 ARMADA LE, i SOLD MY FACTORY DVD PLAYER AND FLIP DOWN SCREEN , i WANTED TO BE A NICE GUY AND GIVE THE BUYER THE PLUGS FROM THE DVD HARNESS, i THEN NOTICED THAT MY DASH LIGHTS DID,NT WORK AFTER i CUT THE PLUGS OFF, NOW THIS IS WHERE IT GETS WIERD i CHECKED THE ILLUMINATION FUSE UNDER THE HOOD AND THE FUSES LOOKED GOOD, SOMEHOW i REMOVED THE 10 AMP ILLUMINATION FUSE AND LEFT IT OUT, THE LIGHTS WORKED HOWEVER THEY DID NOT DIM WITH THE DIMMER CONTROL,. i FIGURED THAT i CAN LIVE WITH THIS , AT LEAST THE DASH LIGHTS WERE WORKING. BUT 2 DAYS LATER i HOOKED UP MY BOAT TRAILER AND THE TRAILER LIGHTS WOULD NOT COME ON, i IMMEDIATELY REINSTALLED THE ILLUMINATION FUSE AND THE TRAILER LIGHTS WORK, HOWEVER THE DASH LIGHTS ARE OUT. i NOW REALIZED THAT IN CUTTING THE CONNECTORS OUT OF THE HARNESS i MUST HAVE CUT AN ILLUMINATION WIRE THAT SOMEHOW TIES IN AT ONE OF THESE CONNECTORS. i NEED SOMEONE WHO HAS A SCHEMATIC OR WIRING DIAGRAM OF THESE 2 PLUGS AND MAYBE i CAN CONNECT IT BACK SO THIS PROBLEM GOES AWAY. i WOULD REALLY APPRECIATE ANY HELP i CAN GET .
 

·
Premium Member
Joined
·
5,213 Posts
First, turn off your caps lock key. Posts in all caps are hard to read and are considered as shouting on the forums.
See if the attached diagrams can help you. They are all the Service Manual has on the DVD.
 

Attachments

·
Premium Member
Joined
·
25 Posts
Discussion Starter · #3 ·
scr38 said:
First, turn off your caps lock key. Posts in all caps are hard to read and are considered as shouting on the forums.
See if the attached diagrams can help you. They are all the Service Manual has on the DVD.
sorry for the caps , also thanks for the diagrams. for some reason or another I was only able to enlarge 1 diagram . when I click on any of them they wont enlarge I just get a small thumnail. but I think I found 1 that shows pin 10 and 12 going to illumination system and i saw a R/L and a BR I think that must be the color of the wires , i assume BR is brown and I dont know what R/L means perhaps red with a lavender stripe . I dont have the plugs so pin # won,t help maybe I,ll call the person that I sold it to and he can look at the connector and tell me . thanks again
 

·
Premium Member
Joined
·
5,213 Posts
They all enlarge when I click on them?
Attached is the wire color code.
 

Attachments

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top